| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Warranty: | 12months |
|
Still deciding? Get samples of US$ 1/Set
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction of the Car Paint Spray Booth for Car Painting and Baking with diesel burner
1. full-down draft paint booth:Quick Specification of the Car Paint Spray Booth for Car Painting and Baking with diesel burner
|
Model
|
HY-CB75W
|
||
|
Outside Size(mm)
|
7000*4000*3450(L*W*H)
|
Inside Size(mm)
|
6900*3900*2700(L*W*H)
|
|
Front Door(mm)
|
3000*2600(W*H)
|
Side Door(mm)
|
600*1800(W*H)
|
|
Total power
|
20kW
|
Voltage status
|
380V/3ph&220V/1ph@50Hz
|
|
Cabin System
|
Wall panel: 50mm EPS sandwich panel, steel sheet thickness: 0.426mm
Ceiling panel: 50mm rock-wool panel. Basement: 300mm depth, full galvanized grids basement Ramps: Three pieces ramps Glass: 4mm safety tempered glass Windows: Square glass windows |
||
|
Air make-up System
|
Air Inlet fan: 1*7.5kW;
Exhausted fan: 1*7.5kW; Air capacity for fresh air: 25000m3/h Air Flowing speed: 0.3m/s in empty booth Air ducting: 8meters straight ducting, one damper and one weather hood. |
||
|
Water-based System
|
Ceiling nozzles: 32pcs stainless steel nozzles
Corner dryers: 2pcs with 0.18kW motor Ceiling fan: 2*1.5kW, air capacity: 4500m3/h |
||
|
Filter System
|
Pre-filter: G3 grade, Pockets filter.
Ceiling filter: Hi-efficiency filter,EU5 / F5 Floor filter: green fiber glass filter / G3 grade Exhausted fan Filters: green fiber glass filter and active carbon |
||
|
Heating System
|
Heat Converter: SUS304 material, argon arc welding.
Heating burner: RielloG20 diesel oil burner(gas burner for option) Heating productivity: 180000Kcal/h Spray to baking switch: 20N BELIMO brand electrical damper Chimney ducting: 3 meters stainless ducting and one chimney elbow Max heating temperature: 80degrees fuel consumption: 6-8L /vehicle |
||
|
Lighting
|
Ceiling lights:8 Units, each 4*36W lamps, Total 1152W
Side lights: 6Units, each 2 * 36W lamps, Total 432W Illumination: 1000LUX |
||
|
Control System
|
Spraying & baking switch, lighting switch, emergency stop, breakdown alarm, failure alarm, pressure gauge
|
||
Project case for paint booth
Our Team is serving you at any time
Send us inquiry about Car Paint Spray Booth for Car Painting and Baking with diesel burner
FAQ
Q 1: Are you Manufacturer or Trading company?
A:We are a professional manufacturer with our own export department. So you can get best price from us.
Q 2: Where is your company located? How can I visit there?
A:Our company is located in Binzhou, near JINAN airport and ZIBO train station. All clients, from home and abroad, are warmly welcomed to visit us.
Q 3: What is your terms of delivery?
A: Normally our quotation is under FOB Qingdao, but we also accept EXW, FOB(other seaports), CFR, CIF, DDU and so on.
Q 4: What is your terms of payment?
A: By T/T, 40% as deposit for production, and 60% balance before delivery. We'll show you the photos of the products and packages before you pay the balance. Other payment terms are as negotiated. For small amount order, we also accept WU, Paypal, MoneyGram and so on.
Q 5: What is your terms of packing?
A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton, and wooden box as required.
Q 6: How about your delivery time?
A: Generally, the goods will be ready within 7 to 10 days after receiving deposit for standard goods. Some kinds are even in stock. If your voltage is different from 380V/3PH/50Hz, the delivery time will be a little longer for custom-made motors or electric components.
Q 7: Can you produce according to the technical drawings?
A: Yes, we can produce by your technical drawings or requirements. We also can make drawings for you.
Q 8: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit;
A2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q 9: How about the quality of the products?
A:With the advanced machines, strong and professional R&D team and material sources, our products are excellent in performance and craftsmanship.
Why Choose Us
1.More than 10-year manufacturing experience involved in this industry, and 10-year rich export experience
2.Superb unique technology and Automatic production line.
3.Large order can be placed.
4.Advanced equipment and exquisite workmanship.
5.Durable and reliable
6.Professional pre-sales and after-sales service
){kind=link}